estiramientotvtv

Here is a short video requested by a customer on how to remove the drive wheels and final drive shaft for the T34. As some of you know the assembly for the chassis is a bit different for the T34 as our other tanks so hopefully this helps those who might need it. Here are the steps:
-Open the tank
-If unfamiliar with the wiring please take a picture, otherwise unplug the upper hull from the lower hull and the smoke unit.
-Unscrew the 4 screws as shown in the video to remove the two gearboxes at once.
-Remove tracks (you can do this before or after the gearbox removal with this tank)
-Remove the front swivel plate as shown. The trick is to swivel it backwards and it will come off a lot easier. (Don't lose the bearings!)
-Remove hub cap from drive wheel and use a 2.5mm hex driver to unscrew the drive wheel.
-Separate the drive wheel from the final drive shaft (you will most likely have to wiggle it a bit here!)

Hey Tankers,
Here is the product TAG120626, it is the airsoft 360 kit with machine gun option. This mod is almost plug and play, you will need to solder two wires as instructed. You can find the item for purchase here: http://www.imex-model.com/product/TAG...

Hello Tankers,
This video shows how to replace or remove a Taigen Tiger 1 suspension arm as well as how to preload the torsion bar for a softer or stiffer suspension. Our other torsion bar tanks such as the Panzer III, KV-1/KV-2, Sturmgeschutz III, Sturmtiger, Torro King Tiger, and the new Jagdtiger will be very similar.

It's not hard to understand why.