estiramientotvtv

This video shows how to replace the idler wheel arms and torsion bar for the Tiger 1 tank. Sometimes the idler wheels arms break and you cannot pull out the arm from the connector. This video will show you how to replace the whole connector and arms.
-Start by taking the tracks off. There is another video showing how to do that, check my videos.
-Next take off the latching system for the top hull.
-Unscrew the set screws holding the idler arms in and remove them if you can.
-Unscrew the track tensioner screws evenly until the torsion bar can be removed.
-Follow the video on how to replace the idler arm holders correctly.
-Screw the track tensioner screws evenly and place the torsion bar back in it's position in the hull.
-Leave the tensioners loose until you reassemble the tank and put the tracks on. You can then adjust the tracks after it is assembled.

A manual can be provided also on a step by step basis if you need. Please email me at IMEX@taigentanks.com and I will be happy to send a file over :)

Hey Tankers,
Here is the product TAG120627, it is the infrared 360 kit with no machine gun option. It is a simple plug and play install and shouldn't take more than a few minutes! You can find the item for purchase here: http://www.imex-model.com/product/TAG...