estiramientotvtv

Hey tankers!
Today we go over a simple turret rotation assembly swap. The swap is pretty straight forward:
- Remove the 3 screws that hold the unit in place.
- Cut or desolder the wires from the upper hull board.
- Splice or solder the wires back into place with the new unit.
- Secure unit back in place with the three screw holes.

Unfortunately(kinda?) my unit is not broke so I cannot demonstrate how to test it at the same time. We did however make another video in this playlist on how to diagnose DC brushed motors if you need to learn. Now the swap is simple, remove screws, replace unit, and either splice or solder the wires.

I personally will solder, but I understand some do not like to solder or do not want to. You can splice the wires just like it was a speaker wire, just make sure to tape them good afterwards so they do not contact each other or anything else.

Hello tankers,
Here is a quick unboxing of the Torro KV-2. It features:
metal chassis (torsion bar suspension)
metal suspension arms
metal road wheels
metal return rollers
metal drive wheels
metal idler wheels
metal caterpillar tracks
metal toolboxes
steel 3:1 gearboxes

The tank is RTR and comes with a 2.4GHz radio. A smoke unit, speaker, and recoil are extra included features for the tank. It also comes with either an airsoft or infrared firing unit. More information can be found at www.TaigenTanks.com

Hey tankers,
In this video we will be diagnosing brushed motors. Brushed motors run everything in the tank such as the caterpillar tracks, smoke unit, turret rotation, elevation, firing, and even recoil on the IR barrel. Sometimes these components will fail, and there is a simple way to tell if it is your motor or some other issue.
DC brushed motors are very simple and run off DC current. Applying DC current directly to the motors as shown will make the motor spin. Reversing the polarity will change the motor direction on a brushed motor. Please never apply more than 6V when testing the motors. The test is only to see if the motor will spin when bypassing the electronics and giving it direct power. If it does work then you either have a wiring issue or faulty electronics somewhere. Follow your wires back and test voltage farther down the line. Always make sure to unplug EVERYTHING before applying voltage to things. You can burn out your other electronics by backfeeding voltage into it!

Hello tankers,
Today I will show you how to bind our tanks in a bit more detail than the previous video. Remember these steps:
1. Left toggle away from you, right toggle towards you on transmitter.
2. Turn on tank and transmitter at same time. Transmitter light will blink.
3. When transmitter light goes solid press the right toggle switch forward.

Enjoy! You are now bound to your tank! If you use the left toggle switch (ignition switch) you can start you tank and start tanking away.

Hey tankers! The T34/85 comes in two color options, the soviet green and winter whitewash. The green tanks will be TAG13030 and TAG13031 while the whitewash tanks will be TAG13032 and TAG13033. They can be found at our website here: http://www.taigentanks.com/new-blog/2... and here: http://www.taigentanks.com/new-blog/2...

Here is the new final drive system for the Taigen T34 tank. It still has a 4:1 gearbox, but things have changed a bit. Watch and see!

Visit our website at www.taigentanks.com or our Facebook at www.facebook.com/taigen.tanks for more info or where to buy!