estiramientotvtv

This video shows how to replace the idler wheel arms and torsion bar for the Tiger 1 tank. Sometimes the idler wheels arms break and you cannot pull out the arm from the connector. This video will show you how to replace the whole connector and arms.
-Start by taking the tracks off. There is another video showing how to do that, check my videos.
-Next take off the latching system for the top hull.
-Unscrew the set screws holding the idler arms in and remove them if you can.
-Unscrew the track tensioner screws evenly until the torsion bar can be removed.
-Follow the video on how to replace the idler arm holders correctly.
-Screw the track tensioner screws evenly and place the torsion bar back in it's position in the hull.
-Leave the tensioners loose until you reassemble the tank and put the tracks on. You can then adjust the tracks after it is assembled.

A manual can be provided also on a step by step basis if you need. Please email me at IMEX@taigentanks.com and I will be happy to send a file over :)

Hey tankers!
Today we go over a simple turret rotation assembly swap. The swap is pretty straight forward:
- Remove the 3 screws that hold the unit in place.
- Cut or desolder the wires from the upper hull board.
- Splice or solder the wires back into place with the new unit.
- Secure unit back in place with the three screw holes.

Unfortunately(kinda?) my unit is not broke so I cannot demonstrate how to test it at the same time. We did however make another video in this playlist on how to diagnose DC brushed motors if you need to learn. Now the swap is simple, remove screws, replace unit, and either splice or solder the wires.

I personally will solder, but I understand some do not like to solder or do not want to. You can splice the wires just like it was a speaker wire, just make sure to tape them good afterwards so they do not contact each other or anything else.

This is a quick video on how to change out your airsoft unit if your airsoft motor is still working. If you try to fire and you hear a whirling noise or a clicking noise then your motor is still working. You are in luck as you only just need to replace the firing unit. This quick video will go over how to do it. It is the same on any of the airsoft tanks, just getting into the turret will be different. Please contact IMEX@taigentanks.com if you need a wiring diagram or have further questions!

Also, please sign up for the newsletter at our website! www.taigentanks.com or add us on facebook at www.facebook.com/taigen.tanks

This is a first look at our new T34 from Taigen. This tank features a lower metal suspension, metal road wheels with bearings, metal idler wheels with bearings, 4:1 steel gearboxes, metal tracks, metal drive wheels, metal turret, metal gun barrel, metal hatches, airbrushed paint job, and of course our new 360 turret!
Here I will go into a bit of detail showing the internals of the tank. It isn't %100 final, but very close. Come take a look!

We now stock crossbars for our tanks! These strengthen the chassis and also give the turret more support. I made a small quick video on how to install them for everyone!

Visit our webpage at www.taigentanks.com for more information or accessories! The crossbars will be added to our parts section soon! If you need one now, give us a call!

This is a simple video showing how to access the turret. I made this for a customer that had a small piece of plastic fall inside his tank and wanted to know how to fish it out. I hope this helps anyone that needs it!

Visit our website for more info at www.taigentanks.com and sign up for the newsletter!! Add us on Facebook too while you are at it! You never know what promos we will be running!

Hey tankers,
Here is a quick unboxing of the Taigen Tanks KV-1. It features:
metal chassis (torsion bar suspension)
metal suspension arms
metal road wheels
metal return rollers
metal drive wheels
metal idler wheels
metal caterpillar tracks
metal toolboxes
metal 3: 1 gearboxes

The tank is RTR and comes with a 2.4GHz radio. A smoke unit, speaker, and recoil are extra included features for the tank. It also comes with either an airsoft or infrared firing unit. More information can be found at www.TaigenTanks.com

Hello tankers,
Here is a quick unboxing of the Torro KV-2. It features:
metal chassis (torsion bar suspension)
metal suspension arms
metal road wheels
metal return rollers
metal drive wheels
metal idler wheels
metal caterpillar tracks
metal toolboxes
steel 3:1 gearboxes

The tank is RTR and comes with a 2.4GHz radio. A smoke unit, speaker, and recoil are extra included features for the tank. It also comes with either an airsoft or infrared firing unit. More information can be found at www.TaigenTanks.com

Hey Tankers,
Here is the product TAG120626, it is the airsoft 360 kit with machine gun option. This mod is almost plug and play, you will need to solder two wires as instructed. You can find the item for purchase here: http://www.imex-model.com/product/TAG...

Hey Tankers,
Here is the product TAG120627, it is the infrared 360 kit with no machine gun option. It is a simple plug and play install and shouldn't take more than a few minutes! You can find the item for purchase here: http://www.imex-model.com/product/TAG...