estiramientotvtv

This video shows how to replace the idler wheel arms and torsion bar for the Tiger 1 tank. Sometimes the idler wheels arms break and you cannot pull out the arm from the connector. This video will show you how to replace the whole connector and arms.
-Start by taking the tracks off. There is another video showing how to do that, check my videos.
-Next take off the latching system for the top hull.
-Unscrew the set screws holding the idler arms in and remove them if you can.
-Unscrew the track tensioner screws evenly until the torsion bar can be removed.
-Follow the video on how to replace the idler arm holders correctly.
-Screw the track tensioner screws evenly and place the torsion bar back in it's position in the hull.
-Leave the tensioners loose until you reassemble the tank and put the tracks on. You can then adjust the tracks after it is assembled.

A manual can be provided also on a step by step basis if you need. Please email me at IMEX@taigentanks.com and I will be happy to send a file over :)

Hello tankers!
Today we have a very special tank to show off... The Sherman! This is the M4A3 75mm turret version. This tank is a huge step up from our previous tanks, this guy has a solid 1 piece lower chassis, with NO structural plastic support on the inside of the tank except for the battery compartment and the on/off switch panel. This tank has 2mm thick fenders, back plate, and lower chassis! The suspension is metal as well as the road wheels, drive wheels, and idler wheels. The road wheels also have rubber tires :)
The turret is metal with a cast texture and has a metal barrel as well. It is our newest 360 degree turret design as well. The Sherman will become available in either airsoft or infrared versions.
The Sherman also comes with High/Low motor mounted gearboxes with a 3:1 ratio gearbox. A 4:1 will be made available for purchase at the same time for those who wish for a bit more torque. The stock gearboxes are steel and the motors are our new black can motors which should stay a bit cooler than our previous ones.
The Sherman also comes with a dedicated battery compartment as you will see in the video. It holds a standard 6 cell NIMH battery just fine and even held my 2 cell lipo (your mileage may vary there) perfectly. This is a nice addition as we now do not have to worry as much about if our batteries are flopping around in the tank as much.
This tank will be made available in October hopefully in time for the movie Fury!

Hey tankers! The T34/85 comes in two color options, the soviet green and winter whitewash. The green tanks will be TAG13030 and TAG13031 while the whitewash tanks will be TAG13032 and TAG13033. They can be found at our website here: http://www.taigentanks.com/new-blog/2... and here: http://www.taigentanks.com/new-blog/2...

Here is the new final drive system for the Taigen T34 tank. It still has a 4:1 gearbox, but things have changed a bit. Watch and see!

Visit our website at www.taigentanks.com or our Facebook at www.facebook.com/taigen.tanks for more info or where to buy!