estiramientotvtv

Here is a short video requested by a customer on how to remove the drive wheels and final drive shaft for the T34. As some of you know the assembly for the chassis is a bit different for the T34 as our other tanks so hopefully this helps those who might need it. Here are the steps:
-Open the tank
-If unfamiliar with the wiring please take a picture, otherwise unplug the upper hull from the lower hull and the smoke unit.
-Unscrew the 4 screws as shown in the video to remove the two gearboxes at once.
-Remove tracks (you can do this before or after the gearbox removal with this tank)
-Remove the front swivel plate as shown. The trick is to swivel it backwards and it will come off a lot easier. (Don't lose the bearings!)
-Remove hub cap from drive wheel and use a 2.5mm hex driver to unscrew the drive wheel.
-Separate the drive wheel from the final drive shaft (you will most likely have to wiggle it a bit here!)

Hey Tankers,
Here is the product TAG120626, it is the airsoft 360 kit with machine gun option. This mod is almost plug and play, you will need to solder two wires as instructed. You can find the item for purchase here: http://www.imex-model.com/product/TAG...

Hey Tankers,
Here is the product TAG120627, it is the infrared 360 kit with no machine gun option. It is a simple plug and play install and shouldn't take more than a few minutes! You can find the item for purchase here: http://www.imex-model.com/product/TAG...

Hey tankers,
In this video we will be diagnosing brushed motors. Brushed motors run everything in the tank such as the caterpillar tracks, smoke unit, turret rotation, elevation, firing, and even recoil on the IR barrel. Sometimes these components will fail, and there is a simple way to tell if it is your motor or some other issue.
DC brushed motors are very simple and run off DC current. Applying DC current directly to the motors as shown will make the motor spin. Reversing the polarity will change the motor direction on a brushed motor. Please never apply more than 6V when testing the motors. The test is only to see if the motor will spin when bypassing the electronics and giving it direct power. If it does work then you either have a wiring issue or faulty electronics somewhere. Follow your wires back and test voltage farther down the line. Always make sure to unplug EVERYTHING before applying voltage to things. You can burn out your other electronics by backfeeding voltage into it!

Hey tankers! The T34/85 comes in two color options, the soviet green and winter whitewash. The green tanks will be TAG13030 and TAG13031 while the whitewash tanks will be TAG13032 and TAG13033. They can be found at our website here: http://www.taigentanks.com/new-blog/2... and here: http://www.taigentanks.com/new-blog/2...

Hello Tankers,
This video shows how to replace or remove a Taigen Tiger 1 suspension arm as well as how to preload the torsion bar for a softer or stiffer suspension. Our other torsion bar tanks such as the Panzer III, KV-1/KV-2, Sturmgeschutz III, Sturmtiger, Torro King Tiger, and the new Jagdtiger will be very similar.

Hey Tankers!!
Here is a quick first look at the Torro Jagdtiger 1/16th scale RTR RC Tank! Next week we will do some teardowns and rebuilds so everyone can get a bit more familiar with them. Please enjoy and click subscribe if you like!
The Torro Jagdtiger can be found on our website at www.TaigenTanks.com